LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Upper Intake Manifold >> Removal (2.5L Contour, Cougar & Mystique)

Removal (2.5L Contour, Cougar & Mystique)

  1. Remove air cleaner housing and outlet tube. Disconnect negative battery cable. Remove water pump pulley shield. Remove bolts retaining accelerator bracket. Disconnect accelerator and cruise control cable from throttle body and position aside. Remove EGR valve retaining bolts, EGR valve and discard gasket.
  2. Depress Black retainer and disconnect vacuum hoses from upper intake manifold. Disconnect electrical connector and vacuum hose from EGR vacuum regulator valve. Disconnect PCV hose. Disconnect Throttle Position (TP) sensor and Idle Air Control (IAC) valve electrical connectors. Loosen upper intake manifold bolts in sequence. See Figure. Remove upper intake manifold and discard gaskets.
scientia non olet · About LEMON Manuals