LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Injection Supply Manifold & Injectors >> Removal (3.0L Except DOHC - VIN U & 2)

Removal (3.0L Except DOHC - VIN U & 2)

  1. Ensure ignition switch is turned to OFF position. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Disconnect negative battery cable. Remove upper intake manifold. See UPPER INTAKE MANIFOLD . Disconnect fuel supply line. See FUEL LINE CONNECTOR .
  2. Disconnect electrical connector and vacuum hose from fuel pressure sensor. Disconnect 6 fuel injector electrical connectors. Remove 4 fuel injection supply manifold retaining bolts. Carefully remove fuel injection supply manifold and injectors as a unit. Remove fuel injectors and discard "O" rings.
scientia non olet · About LEMON Manuals