LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Injection Supply Manifold & Injectors >> Removal (2.0L SOHC - Focus)

Removal (2.0L SOHC - Focus)

  1. Ensure ignition switch is turned to OFF position. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Disconnect negative battery cable. Disconnect vacuum hose and electrical connector from fuel pressure sensor. Disconnect fuel supply and return lines.
  2. Disconnect fuel injector electrical connectors. Remove 2 bolts retaining fuel injection supply manifold. Carefully disengage fuel injection supply manifold from fuel injectors. Remove fuel injection supply manifold. Remove 2 bolts retaining fuel pressure sensor and remove sensor. Carefully remove fuel injectors and discard "O" rings.
scientia non olet · About LEMON Manuals