Removal (2.0L DOHC - Focus)

Ensure ignition switch is turned to OFF position. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Disconnect negative battery cable. Remove air cleaner outlet tube and resonator. Disconnect fuel supply and return lines. See FUEL LINE CONNECTOR . Remove fuel supply and return hose clamp. Disconnect vacuum hose and electrical connector from fuel pressure sensor. Remove accelerator cable retaining clip. Disconnect accelerator cable from bracket.
On vehicles equipped with cruise control, disconnect cruise control cable from throttle body. Remove cruise control cable from bracket. On all vehicles, disconnect fuel injector electrical connectors. Remove variable camshaft timing solenoid electrical connector grommet from engine cover. Disconnect variable camshaft timing solenoid electrical connector. Position fuel injection wiring harness aside. Remove fuel injection supply manifold and injectors.