LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 2.5L V6 - VIN G & L >> Overhaul >> Cylinder Block Assembly >> Fitting Main Bearings

Fitting Main Bearings

  1. Check main bearing surfaces for wear and damage. Use Plastigage method for checking bearing clearance. Check all bearings at the same time. If clearance is not to specification, replace bearings until proper clearance is reached.
scientia non olet · About LEMON Manuals