LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 2.5L V6 - VIN G & L >> Engine Oiling >> Oil Pump >> Removal

Oil Pump: Removal

  1. Remove oil pump screen cover and tube. Remove front cover. See FRONT COVER  under REMOVAL & INSTALLATION. Remove timing chain and crankshaft sprocket. See TIMING CHAINS  under REMOVAL & INSTALLATION.
  2. Remove oil pump retaining bolts following sequence shown. See Fig 1. Remove oil pump from cylinder block.
Fig 1: Oil Pump Retaining Bolt Removal Sequence
G95A14456Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals