Moon Roof Control Switch
Remove moon roof control switch. Using an ohmmeter, ensure continuity exists between indicated moon roof control switch terminals when switch is in specified position. See MOON ROOF CONTROL SWITCH CONTINUITY TEST table. See Fig 1 . Replace switch if it does not test as specified.
MOON ROOF CONTROL SWITCH CONTINUITY TEST
| Switch Position | Continuity Between Terminals No. |
|---|---|
| Neutral | 1 & 6; 3 & 7 |
| Down/Open | 1 & 6; 2 & 7 |
| Up/Closed | 1 & 2; 3 & 7 |