LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panels - Analog >> Removal & Installation >> Fuel Gauge >> Removal & Installation

Removal & Installation

  1. Disconnect negative battery cable. Remove instrument cluster. See INSTRUMENT CLUSTER  .
  2. Separate instrument cluster housing from instrument cluster back plate. Remove speedometer. See SPEEDOMETER/ODOMETER  .
  3. Carefully remove fuel gauge retaining screw and fuel gauge assembly by pulling fuel gauge assembly away from instrument cluster back plate. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals