LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System Deactivation Procedures >> General Motors >> Disabling & Activating Air Bag System >> Activating System (Lumina)

Activating System (Lumina)

  1. Remove key from ignition switch. Connect passenger air bag Yellow 2-pin air bag connector behind glove box. Install CPA clip. Install glove box and sound insulator panel.
  2. Connect driver air bag Yellow 2-pin air bag connector at base of steering column. Install CPA clip. Install sound insulator panel.
  3. Install fuse No. 21 in fuse block. Staying well away from air bag modules, turn ignition switch to ON position. Ensure AIR BAG warning light flashes 7 times, and then turns off.
Fig 1: Locating Driver Air Bag Yellow 2-Pin Connector (Lumina)
G98B09807Courtesy of GENERAL MOTORS CORP.
Fig 2: Locating Passenger Air Bag Yellow 2-Pin Connector (Lumina)
G98H09805Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals