LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System Deactivation Procedures >> Ford Motor Co. >> Disabling & Activating Air Bag System >> Activating System (Focus)

Activating System (Focus)

  1. Disconnect negative battery cable. Wait at least 1 minute for backup power supply to deplete stored energy. Remove the seat belt pretensioner simulators from the vehicle harness. Connect seat belt pretensioner connectors to vehicle harness.
  2. Remove air bag simulator from clockspring connector at top of steering column. Install driver air bag module. Remove air bag simulator from passenger air bag vehicle harness connector. Reconnect passenger air bag module connector. Install glove box.
  3. Remove air bag simulator from driver side air bag vehicle harness. Reconnect driver side air bag module connector. Repeat procedure for passenger side air bag connector.
  4. Reconnect negative battery cable. Perform SYSTEM OPERATION CHECK .
scientia non olet · About LEMON Manuals