LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine - 2.5L V6 - VIN G & L) >> Removal & Installation >> Water Pump >> Removal

Water Pump: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect negative battery cable. Drain cooling system. Remove water pump pulley shield. Rotate water pump drive belt tensioner clockwise to release drive belt tension. Remove water pump drive belt. Disconnect water hoses from water pump. Remove 6 water pump-to-front cylinder head retaining bolts. Remove water pump from front cylinder head. If necessary, remove water pump from water pump housing and remove drive belt tensioner.

scientia non olet · About LEMON Manuals