Pistons, Piston Pins & Piston Rings Specifications
WARNING: This page is about a different variant/trim than selected.
PISTONS, PINS & RINGS
| Application | In. (mm) | |||||
|---|---|---|---|---|---|---|
| Pistons | ||||||
| Clearance | ||||||
| Standard | .0005-.0009 (.013-.023) | |||||
| Service Limit | (1) | |||||
| Diameter | ||||||
| Code 1 | 3.2436-3.2444 (82.390-82.410) | |||||
| Code 2 | 3.2440-3.2457 (82.398-82.442) | |||||
| Code 3 | 3.2444-3.2452 (82.410-82.430) | |||||
| Pins | ||||||
| Diameter | .8270-.8272 (21.008-21.012) | |||||
| Piston Fit | (1) | |||||
| Rod Fit | .0001-.0007 (.003-.018) | |||||
| Rings | ||||||
| No. 1 | ||||||
| End Gap | .0039-.0098 (.100-.250) | |||||
| Side Clearance | ||||||
| Standard | .0015-.0029 (.040-.075) | |||||
| Service Limit | .020 (.50) | |||||
| No. 2 | ||||||
| End Gap | .0106-.0165 (.27-.42) | |||||
| Side Clearance | ||||||
| Standard | .0015-.0033 (.040-.084) | |||||
| Service Limit | .025 (.650) | |||||
| No. 3 (Oil) | ||||||
| End Gap | .0059-.0255 (.15-.65) | |||||
|
||||||