Cylinder Head Specifications
WARNING: This page is about a different variant/trim than selected.
CYLINDER HEAD
| Application | Specification | |||||
|---|---|---|---|---|---|---|
| Cylinder Head Height | (1) | |||||
| Maximum Warpage | (1) | |||||
| Manifold Surface | (1) | |||||
| Valve Seats | ||||||
| Seat Angle | 44.75° | |||||
| Valve Seat Width | ||||||
| Exhaust | .055-.066" (1.40-1.68 mm) | |||||
| Intake | .043-.055" (1.10-1.40 mm) | |||||
| Valve Guides | ||||||
| Intake Valve | ||||||
| Valve Guide I.D. | (1) | |||||
| Valve Guide Installed Height | (1) | |||||
| Valve Stem-To-Guide Oil Clearance | ||||||
| Standard | .0007-.0027" (.020-.069 mm) | |||||
| Service Limit | (1) | |||||
| Exhaust Valve | ||||||
| Valve Guide I.D. | (1) | |||||
| Valve Guide Installed Height | (1) | |||||
| Valve Stem-To-Guide Oil Clearance | ||||||
| Standard | .0017-.0037" (.045-.094 mm) | |||||
| Service Limit | (1) | |||||
|
||||||