Camshaft Specifications
WARNING: This page is about a different variant/trim than selected.
CAMSHAFT
| Application | In. (mm) | |||
|---|---|---|---|---|
| End Play | ||||
| Standard | .0010-.0064 (.025-.165) | |||
| Service Limit | .0074 (.190) | |||
| Journal Diameter | ||||
| All Journals | 1.060-1.061 (26.926-26.949) | |||
| Journal Runout | (1) | |||
| Lobe Lift (Intake & Exhaust) | ||||
| Standard | .188 (4.79) | |||
| Service Limit | .188 (4.79) | |||
| Oil Clearance (All Journals) | ||||
| Standard | .0010-.0030 (.025-.076) | |||
| Service Limit | .0047 (.120) | |||
|
||||