LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Automatic Transmission - Diagnosis - Cd4E) >> Diagnosis & Testing >> Transmission Solenoid Cycling & Drive Test (Dynamic Test) >> Turbine Shaft Speed Sensor Function Check

Turbine Shaft Speed Sensor Function Check

WARNING: This page is about a different variant/trim than selected.

Set voltmeter to 20 volts A/C. Connect voltmeter leads to appropriate TSS sensor jacks. Slowly accelerate vehicle and monitor voltmeter reading. Voltage should increase with vehicle speed.

scientia non olet · About LEMON Manuals