LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls - Removal, Overhaul & Installation - CNG/LPG (Bi-Fuel)) >> Fuel System >> Fuel Tank Shutoff Solenoid Valve >> Installation

Fuel Tank Shutoff Solenoid Valve: Installation

WARNING: This page is about a different variant/trim than selected.

Replace "O" rings. Lubricate "O" rings with clean 5W-30 engine oil. Ensure threads on valve and tank are clean and in good condition. Install components by hand. Inspect threads if resistance is felt during installation. Ensure fuel lines are aligned before tightening. DO NOT cross-thread fittings. Tighten fittings to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.

scientia non olet · About LEMON Manuals