LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 986 (Engine - 4.2L -- F150 Pickup) >> In-Vehicle Repair >> Exhaust Manifold - RH >> Removal

Exhaust Manifold - RH: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Detach the exhaust manifold-to-EGR system module tube from the exhaust manifold.
  3. Disconnect the heated oxygen sensor (HO2S) electrical connector.
  4. Remove the bolts and detach the dual converter Y-pipe.
  5. Remove the nuts and the engine lifting eye.
  6. Remove the nuts, the RH exhaust manifold and the gasket. Discard the nuts and the gasket.
  7. Remove and discard the 6 RH exhaust manifold studs.
scientia non olet · About LEMON Manuals