LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 983 (Engine Cooling System -- F150 Pickup) >> Diagnosis And Testing >> Engine Cooling >> Component Tests >> Thermostat >> Thermostat - Mechanical Test

Thermostat - Mechanical Test

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the thermostat.
  2. Check the thermostat for seating. Hold the thermostat up to a lighted background. Leakage of light around the thermostat valve at room temperature indicates that a new thermostat should be installed. Some thermostats have a small leakage notch at one location on the perimeter of the thermostat valve, which is considered normal.
  3. Immerse the thermostat in a boiling antifreeze and water mixture.
  4. For additional information, refer to SPECIFICATIONS  for thermostat opening temperature.
scientia non olet · About LEMON Manuals