LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 979 (Starting System -- F150 Pickup) >> Diagnosis And Testing >> Starting System >> Pinpoint Tests >> Pinpoint Test C: The Engine Cranks Slowly >> Pinpoint Test C: The Engine Cranks Slowly

Pinpoint Test C: The Engine Cranks Slowly

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. C1 CHECK THE VOLTAGE TO THE STARTER 
    • Key in OFF position.
    • Measure the voltage between starter motor solenoid positive terminal and ground.
      Fig 1: Measuring Voltage Between Starter Motor Solenoid Positive Terminal And Ground
      G03888145Courtesy of FORD MOTOR CO.
    • Is the voltage 12.5 volts or greater? 
    • Yes  : GO to  C2.
    • No  : REPAIR circuit 2037 (RD). CLEAN and TIGHTEN the connections at the battery terminals. TEST the system for normal operation.
  2. C2 CHECK MOTOR GROUND CIRCUIT 
    • Carry out the motor ground circuit test. Refer to COMPONENT TESTS .
    • Is the ground OK? 
    • Yes  : INSTALL a new starter motor. TEST the system for normal operation.
    • No  : REPAIR the ground circuit as necessary. TEST the system for normal operation.
scientia non olet · About LEMON Manuals