Crankshaft Rear Seal with Retainer Plate: Notes
WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL(S) CHART
| Installer, Crankshaft Rear Seal 303-518 (T95P-6701-DH) | |
| Remover, Crankshaft Rear Seal 303-519 (T95P-6701-EH) | |
| Installer, Crankshaft Rear Seal 303-516 (T95P-6701-BH) | |
| Remover, Crankshaft Rear Oil Slinger 303-514 (T95P-6701-AH) | |
| Installer, Crankshaft Rear Oil Slinger 303-517 (T95P-6701-CH) | |
| Impact Slide Hammer 100-001 (T50T-100-A) |
MATERIAL ITEM SPECIFICATION
| Item | Specification |
|---|---|
| Motorcraft Metal Surface Prep ZC-31 | - |
| Silicone Gasket Remover ZC-30 | - |
| Silicone Gasket and Sealant TA-30 | WSE-M4G323-A4 |
| Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (in Canada Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12) or equivalent | WSS-M2C930-A |