LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 972 (Engine - 4.6L (2V) - F150 Pickup) >> In-Vehicle Repair >> Oil Pump >> Removal

Oil Pump: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the timing drive components. For additional information, refer to TIMING DRIVE COMPONENTS .
  3. Remove the oil pan. For additional information, refer to OIL PAN .
  4. Remove the 3 bolts and the oil pump screen and pickup tube.
    • Discard the O-ring seal.
    Fig 1: Removing Bolts And Oil Pump Screen And Pickup Tube
    G03933587Courtesy of FORD MOTOR CO.
  5. Remove the 3 bolts and the oil pump.
    Fig 2: Locating Oil Pump Bolts
    G03962525Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals