LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 972 (Engine - 4.6L (2V) - F150 Pickup) >> In-Vehicle Repair >> Hydraulic Lash Adjuster >> Removal

Hydraulic Lash Adjuster: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the camshaft roller followers. For additional information, refer to CAMSHAFT ROLLER FOLLOWER .
    2. NOTE: Each hydraulic lash adjuster is positional. Mark each hydraulic lash adjuster for installation in its original location.
    Fig 1: Removing Hydraulic Lash Adjusters
    G03885650Courtesy of FORD MOTOR CO.
  2. Remove the hydraulic lash adjusters.
scientia non olet · About LEMON Manuals