Crankshaft Pulley: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Remove the cooling fan shroud. For additional information, refer to ENGINE COOLING .
Rotate the tensioner clockwise and remove the drive belt.

Fig 1: Rotating Tensioner Clockwise To Remove Drive Belt
Courtesy of FORD MOTOR CO.

CAUTION: This bolt is torque-to-yield and cannot be reused.

Fig 2: Using Special Tool To Remove Bolt And Washer

Courtesy of FORD MOTOR CO.

Using the special tool, remove the bolt and washer and discard the bolt.
Using the special tool, remove the crankshaft pulley.

Fig 3: Using Special Tool To Remove Crankshaft Pulley
Courtesy of FORD MOTOR CO.