LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 970 (Driveline System - General Information -- F150) >> Diagnosis And Testing >> Driveline System >> Component Tests >> Driveshaft Vibration Diagnosis

Driveshaft Vibration Diagnosis

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: When carrying out the following procedure steps on four-wheel drive vehicles, raise and support the vehicle so that all four wheels do not touch the ground.
  1. Road test the vehicle to determine the critical vibration points. Note the road speed, the engine RPM, and the shift lever positions at which the vibration occurs.
  2. Stop the vehicle, place the transmission lever in neutral and run the engine through the critical speed ranges determined in Step  1.
  3. If no vibration is felt, balance the driveshaft. For additional information, refer to DRIVELINE VIBRATION .
scientia non olet · About LEMON Manuals