LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 957 (Seat System -- F250-F550 Super Duty) >> Removal And Installation >> Heated Seat Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat control switch. For additional information, refer to SEAT CONTROL SWITCH  in this article.
  2. Remove the heated seat switch.
    • Disconnect the heated control switch electrical connector.
    • Depress the locking tabs and remove from the side shield.
      Fig 1: Removing From Side Shield
      G03911417Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals