Front Seat Backrest - 20 Percent: Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Position the armrest in the armrest brackets. Install the RH pivot bolt.

Fig 1: Installing RH Pivot Bolt - With Torque Specifications
Courtesy of FORD MOTOR CO.
Install the two LH latch bolts.

Fig 2: Installing LH Latch Bolts - With Torque Specifications
Courtesy of FORD MOTOR CO.
Install the RH upper seat panels.

Fig 3: Installing RH Upper Seat Panels
Courtesy of FORD MOTOR CO.
Install the RH trim cover.

Fig 4: Installing RH Trim Cover
Courtesy of FORD MOTOR CO.

NOTE: The top of the LH trim panel is press fit onto the top of the bracket.

Install the LH trim panel.
1. Position the safety belt and guide and install the pin-type retainers.
2. Install the two screws.
  
  Fig 5: Installing Screws
  Courtesy of FORD MOTOR CO.
Install the front seat. For additional information, refer to FRONT SEAT - 20 PERCENT in this article.
Check the active restraints for correct operation. For additional information, refer to SAFETY BELT SYSTEM .