Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Remove the eight pin-type retainers and remove the upper radiator sight shield.

Fig 1: Identifying Pin-Type Retainers
Courtesy of FORD MOTOR CO.
Remove the two upper pin-type retainers and position aside the air deflector.

Fig 2: Removing Upper Pin-Type Retainers And Positioning Aside Air Deflector
Courtesy of FORD MOTOR CO.
Detach the ambient temperature sensor pin-type retainer.

Fig 3: Detaching Ambient Temperature Sensor Pin-Type Retainer
Courtesy of FORD MOTOR CO.
Disconnect the electrical connector and remove the ambient temperature sensor.

Fig 4: Disconnecting Electrical Connector And Removing Ambient Temperature Sensor
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.