LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 929 (Handles, Locks, Latches And Entry Systems -- F250-F550 Super Duty) >> Diagnosis And Testing >> Locks, Latches and Entry Systems - Non Module Controlled >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the system.
  2. Visually inspect for obvious signs of mechanical or electrical damage.
    LOCKS, LATCHES AND ENTRY SYSTEMS VISUAL INSPECTION - NON MODULE CONTROLLED

    Mechanical Electrical
    • Binding latch mechanisms
    • Binding linkage
    • Misaligned door
    • Central junction box (CJB) fuse(s):
      • 35 (10A)
      • 41 (10A)
      • 42 (15A)
      • 102 (30A)
    • Circuitry
    • Door lock switch
    • Door lock actuator
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the concern is not visually evident, determine the symptom and proceed to the SYMPTOM CHART .