LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 925 (Instrument Panel And Console -- F250-F550 Super Duty) >> Removal And Installation >> Floor Console >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Front floor console shown, rear floor console similar.

    All vehicles 

  1. Open the floor console cover.
    Fig 1: Locating Floor Console Cover
    G03911738Courtesy of FORD MOTOR CO.
  2. Remove the storage compartment.
    Fig 2: Locating Storage Compartment
    G03911739Courtesy of FORD MOTOR CO.
  3. Remove the console tray mat.
  4. Vehicles not equipped with the rear video entertainment system 

  5. Remove the bolts and the floor console.
    • If equipped, disconnect the electrical connector.
      Fig 3: Floor Console Bolts Torque Specification -- With Torque Specifications
      G03911740Courtesy of FORD MOTOR CO.
  6. Vehicles equipped with the rear video entertainment system 

  7. Remove the floor console bolts.
    Fig 4: Removing Floor Console Bolts - With Torque Specifications
    G03911741Courtesy of FORD MOTOR CO.
  8. Remove the floor console.
    • Slide the console rearwards to disengage it from the hold down bracket.
    • Lift the console to access and disconnect the electrical connectors.
      Fig 5: Identifying Floor Console
      G03911742Courtesy of FORD MOTOR CO.
  9. All vehicles 

  10. To install, reverse the removal procedure.