LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 917 (Charging System (Battery, Mounting And Cables) -- F250-F550 Super Duty) >> Removal And Installation >> Battery Tray >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the auxiliary battery. For additional information, refer to AUXILIARY BATTERY .
  2. Remove the air cleaner assembly. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING .
  3. Remove the bolts and remove the battery tray.
    Fig 1: Removing/Installing Bolts And Battery Tray
    G03924894Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals