Instrument Cluster Diagnostic Trouble Code (DTC) Index
WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
INSTRUMENT CLUSTER DIAGNOSTIC TROUBLE CODE (DTC) INDEX
| DTC | Description | Source | Action |
|---|---|---|---|
| B1201 | Fuel Sender Circuit Failure | Instrument Cluster | GO to PINPOINT TEST B . |
| B1204 | Fuel Sender Circuit Short To Ground | Instrument Cluster | GO to PINPOINT TEST B . |
| B1205 | EIC Switch 2 Assembly Circuit Failure | Instrument Cluster | CHECK for proper assembly of the outer and inner instrument cluster bezels. If the bezels are installed correctly, INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . If the bezels are not installed correctly, REPAIR the bezels. CLEAR the DTCs. REPEAT the self-test. |
| B1317 | Battery Voltage High | Instrument Cluster | REFER to CHARGING SYSTEM - GENERAL INFORMATION to continue diagnosis of the charging system. |
| B1318 | Battery Voltage Low | Instrument Cluster | REFER to CHARGING SYSTEM - GENERAL INFORMATION to continue diagnosis of the charging system. |
| B1342 | ECU is Defective | Instrument Cluster | INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| B1360 | Ignition Run/Ace Circuit Open | Instrument Cluster | GO to PINPOINT TEST A . |
| B2143 | NVM Memory Failure | Instrument Cluster | GO to PINPOINT TEST V . |
| B2477 | Instrument Cluster Configuration Failure | Instrument Cluster | CHECK for correct configuration. REFER to MODULE CONFIGURATION . |
| B2658 | Wait To Start Warning Indicator Circuit Open | Instrument Cluster | GO to PINPOINT TEST T . |
| C1284 | Oil Pressure Switch Failure | Instrument Cluster | GO to PINPOINT TEST D . |
For a complete list of instrument cluster DTCs, refer to MULTIFUNCTION ELECTRONIC MODULES .