General Specifications
WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Lubricants and Sealants | |
| Threadlock and Sealer E0AZ-19554-AA | WSK-M2G351-A5 (Type II) |
| Threadlock 262 E2FZ-19544-B | WSK-M2G351-A6 |
| Silicone Lubricant F7AZ-19G208-BA | ESR-M13P4-A |
| Gasket and Trim Adhesive F3AZ-19B508-AA | - |
| Gasket Maker F8AZ-19B508-AB | WSK-M2G348-A5 |
| Preload | |
| Mainshaft and countershaft | 0.02--0.09 mm (0.00079-0.0035 in) |
| Component Mounting Temperatures | |
| Taper roller bearing inner race | 150°C (300°F) |
| Synchronizer assemblies | 150°C (300°F) |
| Thrust washers | 150°C (300°F) |
| Shaft bushings | 150 °C (300°F) |
| Top roller bearing outer race | 150°C (300°F) |
| Output ball bearing | 150°C (300°F) |
| Fluid | |
| MERCON® Multi-Purpose Automatic Transmission Fluid XT-2-QDX | MERCON® |
| Synchronizer | |
| First and second synchronizer with new gear and synchronizer ring clearance | 1.5--1.85 mm (0.059--0.073 in) |
| Third, fourth, fifth, reverse and low with new gear and synchronizer ring clearance | 1.4--1.7 mm (0.055--0.066 in) |
| First and second service limit | 1.0 mm (0.04 in) |
| Third, fourth, fifth, reverse and low service limit | 1.0 mm (0.04 in) |