LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 852 (Safety Belt System) >> Removal And Installation >> Safety Belt Buckle - Detachable Anchor >> Removal

Safety Belt Buckle - Detachable Anchor: Removal

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. On quad bucket captain chairs, remove the detachable safety belt anchor buckle end.
    1. Use the Safety Belt Bolt Torx Bit to remove the detachable safety belt anchor buckle end bolt.
    2. Remove the detachable safety belt anchor buckle end.
      Fig 1: Removing Detachable Safety Belt Anchor Buckle End
      G03891253Courtesy of FORD MOTOR CO.
  2. On 3-passenger bench seats, remove the detachable safety belt anchor buckle end.
    1. Use the Safety Belt Bolt Torx Bit to remove the detachable safety belt anchor buckle end bolt.
    2. Remove the detachable safety belt anchor buckle end.
      Fig 2: Removing Detachable Safety Belt Anchor Buckle End (3-Passenger Bench Seats)
      G03891254Courtesy of FORD MOTOR CO.