LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 852 (Safety Belt System) >> Removal And Installation >> Safety Belt - Rear 4-Passenger Bench Seat >> Installation

Safety Belt - Rear 4-Passenger Bench Seat: Installation

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Make sure the safety belt webbing is not twisted prior to installation.
    NOTE: Make sure to tighten bolts to specification.
  1. To install, reverse the removal procedure.
    • Check the active restraint system for correct operation.
      Fig 1: Checking Active Restraint System Torque Specification (1 Of 3)
      G03891244Courtesy of FORD MOTOR CO.
      Fig 2: Checking Active Restraint System Torque Specification (2 Of 3)
      G03891245Courtesy of FORD MOTOR CO.
      Fig 3: Checking Active Restraint System Torque Specification (3 Of 3)
      G03891246Courtesy of FORD MOTOR CO.