LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 852 (Safety Belt System) >> Removal And Installation >> Child Safety Seat Tether Anchor - LATCH, Quad Bucket >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat. For additional information, refer to SEATING .
  2. Remove the LATCH.
    1. Unlatch the J-clips on the LATCH cover.
    2. Remove the LATCH bolts.
    3. Remove the LATCH.
      Fig 1: Removing Latch
      G03890929Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
  4. Check the active restraint system for correct operation.
scientia non olet · About LEMON Manuals