Removal and Installation

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Remove the retaining nuts from the rear bumper (17906). Remove the rear bumper.
- Standard bumper shown.
  
  Fig 1: Removing Rear Bumper (Standard)
  Courtesy of FORD MOTOR CO.
Remove the retaining nuts from the rear bumper. Remove the rear bumper.
- Step-type bumper shown.
  
  Fig 2: Removing Rear Bumper (Step-Type)
  Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.
- Step-type bumper shown; standard bumper similar.
  
  Fig 3: Installing Rear Bumper
  Courtesy of FORD MOTOR CO.