LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 848 (Windows And Glass - Glass, Frames And Mechanisms) >> Diagnosis And Testing >> Glass, Frames and Mechanisms >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Visually inspect the components of the power window system to determine if any of the following electrical or mechanical concerns apply.
    VISUAL INSPECTION

    Mechanical Electrical
    • Window alignment
    • IP fuse panel (Fuse 21 (30A))
    • Window mounting (regulator and bracket)
    • Damage to wiring harness
    • Window frame interference
    • Loose or corroded connections
     
    • Damaged switches
  2. Check the wiring harness for obvious signs of shorts, opens, bad connections or damage.
  3. If the fault is not visually evident, determine the symptom. GO to SYMPTOM CHART .
scientia non olet · About LEMON Manuals