LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Engine Controls - Removal, Overhaul & Installation -- ECONOLINE, Excursion & F250-F550 Super Duty - Gasoline) >> Torque Specifications >> ECONOLINE Torque Specifications

ECONOLINE Torque Specifications

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2002 Ford RV Cutaway, 2002 Ford Pickup, 2002 Ford F550 Super Duty, 2002 Ford F450 Super Duty, and 2002 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS (ECONOLINE)

Application Ft. Lbs. (N.m)
Camshaft Position Sensor Synchronizer Bolt (4.2L) 30-37 (40-50)
Cylinder Head Temperature Sensor
  4.2L (1)
  4.6L, 5.4L & 6.8L 19 (26)
EGR Tube Nut
  4.2L 25-34 (34-47)
  4.6L 30 (40)
  5.4L 37 (50)
EGR Valve Bolt
  4.2L (1)
  4.6L, 5.4L & 6.8L (2) 15 (20)
Engine Coolant Temperature Sensor 15 (20)
EVAP Canister Nut 13 (18)
Fuel Pump Lock Ring
Fuel Tank Skid Plate Bolts 9-13 (12-18)
Fuel Tank Strap Fasteners
  Mid Tank 13-17 (17-23)
  Rear Tank 64-75 (87-102)
Heated Oxygen Sensor 34 (47)
Intake Manifold Bolts (4.6L, 5.4L & 6.8L)
  Step 1 (3)
  Step 2 18 (25)
Knock Sensor
  4.2L 15 (20)
  4.6L, 5.4L & 6.8L 18 (25)
Spark Plugs 11 (15)
Upper Intake Manifold Bolt
INCH Lbs. (N.m) 
Battery Cable Nut 80-106 (9-12)
Camshaft Position Sensor Bolts/Screws
  4.2L 89 (10)
  4.6L, 5.4L & 6.8L 71-106 (8-12)
Crankshaft Position Sensor Bolts
  4.2L 62 (7)
  4.6L & 5.4L 89 (10)
  6.8L 71-106 (8-12)
EVAP Canister Purge Valve Nut 80 (9)
Fuel Pressure Relief Valve Cap (4.2L) 4-6 (.5-.7)
Fuel Pump Bolts 71-89 (8-10)
Fuel Rail Bolts 89 (10)
Idle Air Control Bolts 89 (10)
Ignition Coil Nut 53 (6)
Intake Manifold Runner Control Actuator Bolt (4.2L) 89 (10)
Intake Manifold Runner Control Actuator Bracket (4.2L) 89 (10)
Lower Intake Manifold (4.2L)
  Step 1 44 (5)
  Step 2 89 (10)
Lower Intake Manifold (4.6L & 6.8L)
  Step 1 18 (2)
  Step 2 89 (10)
Manifold Spacer (4.2L)
  Step 1 53 (6)
  Step 2 89 (10)
Mass Airflow Sensor 89 (10)
Powertrain Control Module Bracket Bolts 35 (4)
Powertrain Control Module Connector Bolt 53 (6)
Throttle Body-To-Manifold Bolts
  4.2L & 6.8L 71-97 (8-11)
  4.6L & 5.4L (2) 80 (9)
Throttle Position Sensor Screws
  4.2L 18-27 (2.0-3.1)
  4.6L, 5.4L & 6.8L 27 (3.1)
Upper Intake Manifold Bolt (4.2L)
  Step 1 53 (6)
  Step 2 71-89 (8-10)
(1) Tighten to 71-97 INCH lbs. (8-11 Nm).
(2) Plus an additional 90 degrees.
(3) Tighten to 18 INCH lbs. (2 Nm).