Heated Oxygen Sensor: Installation
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2002 Ford RV Cutaway, 2002 Ford Pickup, 2002 Ford F550 Super Duty, 2002 Ford F450 Super Duty, and 2002 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
When replacing HO2S, coat threads with anti-seize compound before installation. New sensors should already have this compound applied to threads. Install HO2S sensor. Tighten HO2S sensor to specification. See TORQUE SPECIFICATIONS . Reconnect wiring connector to HO2S. Reconnect negative battery cable. To complete installation, reverse removal procedure.