LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 829 (Instrument Cluster And Panel Illumination) >> Removal And Installation >> Instrument Cluster Bulb >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster. For additional information, refer to INSTRUMENT CLUSTER .
  2. Remove the instrument cluster illumination bulbs.
    Fig 1: Removing Instrument Cluster Illumination Bulbs
    G03890231Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.