Removal and Installation

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

On the high series console, remove the storage bin.
- Release the locking tabs and remove the storage bin.
  
  Fig 1: Locating Locking Tabs
  Courtesy of FORD MOTOR CO.
Remove the floor console.
- Through the floor console opening, push and hold the locking clip while lifting upward.
  
  Fig 2: Locating Locking Clip
  Courtesy of FORD MOTOR CO.

NOTE: When installing the floor console, be sure the locking clip is fully engaged.

To install, reverse the removal procedure.