Removal & Installation
WARNING: This page is about a different car, the 2002 Mercury Grand Marquis, 2002 Lincoln Town Car, and 2002 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect Throttle Position (TP) sensor from wiring harness. Mark throttle body and TP sensor for reassembly reference. Remove mounting bolts and TP sensor. To install, align tangs on TP sensor with blades on throttle shaft and install sensor on throttle body. Align marks on throttle body and TP sensor. Secure TP sensor to throttle assembly with retaining bolts. Reconnect wiring.