Removal and Installation

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
Remove the fluid cooler tube(s)/hose(s), as necessary.

Fig 1: Removing Fluid Cooler Tube(s)/Hose(s)
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.
- Fill the transmission with clean transmission fluid. For additional information, refer to AUTOMATIC TRANSAXLE/TRANSMISSION - 4R70W/4R75W .
- Check for leaks.