LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 815 (Automatic Transmission - 5R110W) >> In-Vehicle Repair >> Output Shaft Speed (OSS) Sensor >> Installation

Output Shaft Speed (OSS) Sensor: Installation

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the output shaft speed (OSS) sensor.
    1. Lubricate the O-ring and install the output shaft speed (OSS) sensor.
    2. Install the bolt.
      Fig 1: Install Output Shaft Speed (OSS) Sensor
      G03889076Courtesy of FORD MOTOR CO.
  2. Connect the output shaft speed (OSS) sensor electrical connector.
    Fig 2: Identifying Output Shaft Speed (OSS) Sensor Electrical Connector
    G03889074Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals