LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 814 (Automatic Transmission - 4R70W, 4R75W) >> In-Vehicle Repair >> 1 - 2 Accumulator >> Installation

1 - 2 Accumulator: Installation

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the 1 - 2 accumulator.
    1. Install the 1 - 2 accumulator upper spring.
    2. Install the accumulator piston.
    3. Install the inner and outer 1 - 2 accumulator springs.
    4. Install the cover and seal assembly.
      Fig 1: Installing Accumulator Piston
      G03888653Courtesy of FORD MOTOR CO.
  2. Compress the 1-2 accumulator springs and install the accumulator piston retaining ring.
    Fig 2: Locating Accumulator Piston Retaining Ring
    G03888654Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals