LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 805 (Starting System - Gasoline Engines) >> Diagnosis And Testing >> Starting System >> Component Tests >> Starter Solenoid - Solenoid M-Terminal

Starter Solenoid - Solenoid M-Terminal

WARNING: This page is about a different car, the 2005 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make sure the starter solenoid is isolated from the starter motor. Using the 73 Digital Multimeter, check for continuity between the S-and M-terminals. Also check for continuity between the S-terminal and starter motor body. If either check shows no continuity, install a new starter motor.
  2. Check for continuity between the M-terminal and the B-terminal. If there is continuity, install a new starter motor.
scientia non olet · About LEMON Manuals