LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 801 (Fuel Charging & Controls - 4.6L (2V) And 5.4L (2V)) >> Removal And Installation >> Fuel Injectors >> Removal

Fuel Injectors: Removal

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel rail. For additional information, refer to FUEL RAIL .
  2. NOTE: 5.4L shown, 4.6L similar.
    Fig 1: Removing Fuel Injectors From Fuel Rail
    G03885883Courtesy of FORD MOTOR CO.
  3. Remove the fuel injectors from the fuel rail.
  4. Discard the O-ring seals on each fuel injector.
    Fig 2: Discarding O-Ring Seals On Fuel Injector
    G03887912Courtesy of FORD MOTOR CO.