Fuel Injectors: Installation

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Install new O-ring seals on each fuel injector.

Fig 1: Installing O-Ring Seals On Fuel Injector
Courtesy of FORD MOTOR CO.

CAUTION: Check for fuel leakage after installation is complete.

NOTE: Be sure the fuel injectors and the fuel rail are fully seated.

NOTE: Lubricate the new O-ring seals with clean engine oil to aid installation.

Fig 2: Installing Fuel Injectors Into Fuel Rail

Courtesy of FORD MOTOR CO.

Install the fuel injectors into the fuel rail.
Install the fuel rail. For additional information, refer to FUEL RAIL .