LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 798 (Engine - 6.8L- E350 & E450) >> Installation >> Cylinder Heads >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS

G03901093
Installer, Crankshaft Vibration Damper 303-102 (T74P-6316-B)
G03886827
Installer, Crankshaft Front Oil Seal 303-635
G03886455
Holding Tool, Crankshaft 303-448 (T93P-6303-A)
G03886005
Remover/Installer, Cylinder Head 303-572 (T97T-6000-A)
G03948019
Engine Lift Bracket Set 303-DS086 (D93P-6001-A)
G03886715
Modular Engine Lift Bracket 303-F047 (014-00073) or equivalent
G03889585
Strap Wrench 303-D055 (D85L-6000-A)
G03885361
Compressor, Valve Spring 303-567 (T97P-6565-AH)
G03885376
Spacer, Valve Spring Compressor 303-382 (T91P-6565-AH)
G03920628
Installer, Crankshaft Front Oil Seal 303-335 (T88T-6701-A)
G03886987
Alignment Pins, Cylinder Head 303-1040 (SR-015486)