LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 765 (Engine Controls - Powertrain DTC Charts & Description (Except Diesel & Hybrid)) >> Diagnostic Trouble Code (DTC) Charts And Descriptions >> DTC P1001: KOER Not Able To Complete, KOER Aborted

DTC P1001: KOER Not Able To Complete, KOER Aborted

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P1001 - KOER NOT ABLE TO COMPLETE, KOER ABORTED

Description:  This non-malfunction indicator lamp (MIL) code is set when the key on/engine running (KOER) self-test does not complete in the time intended.
Possible Causes: 
  • Incorrect self-test procedure
  • Unexpected response from the self-test monitors
  • RPM out of specification
Diagnostic Aids:  Run the self-test following QT1 in SYMPTOM CHARTS, STEP 1: PCM QUICK TEST .
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the Description, Possible Causes and Diagnostic Aids for the DTC.